An agent-based model to simulate SARS-CoV-2 contamination of surfaces and meat cuts in processing plants.

At the beginning of the COVID-19 pandemic, several contamination clusters were reported in food-processing plants in France and several countries worldwide. Therefore, a need arose to better understand viral transmission in such occupational environments from multiple perspectives: the protection of workers in hotspots of viral circulation; the prevention of supply disruption due to the closure of plants; and the prevention of cluster expansion due to exports of food products contaminated by the virus to other locations. This paper outlines a simulation-based approach (using agent-based models) to study the effects of measures taken to prevent the contamination of workers, surfaces, and food products. The model includes user-defined parameters to integrate characteristics relating to SARS-CoV-2 (variant of concern to be considered, symptom onset…), food-processing plants (dimensions, ventilation…), and other sociodemographic transmission factors based on laboratory experiments as well as industrial and epidemiological investigations. Simulations were performed for a typical meat-processing plant in different scenarios for illustration purposes. The results suggested that increasing the mask-wearing ratio led to great reductions in the probability of observing clusters of more than 25 infections. In the case of clusters, masks being worn by all workers limited the presence of contamination (defined as levels of at least 5 log10 viral RNA copies) on meat cuts at less than 0.05 % and maintained the production capacity of the plant at optimal levels. Increasing the average distance between two workers from less than 1 m to more than 2 m decreased the cluster-occurrence probability by up to 15 % as well as contamination of food products during cluster situations. The developed approach can open up several perspectives in terms of potential communication-support tools for the agri-food sector and further reuses or adaptations for other hazards and occupational environments.

Physical Treatments to Control Clostridium botulinum Hazards in Food.

Clostridium botulinum produces Botulinum neurotoxins (BoNTs), causing a rare but potentially deadly type of food poisoning called foodborne botulism. This review aims to provide information on the bacterium, spores, toxins, and botulisms, and describe the use of physical treatments (e.g., heating, pressure, irradiation, and other emerging technologies) to control this biological hazard in food. As the spores of this bacterium can resist various harsh environmental conditions, such as high temperatures, the thermal inactivation of 12-log of C. botulinum type A spores remains the standard for the commercial sterilization of food products. However, recent advancements in non-thermal physical treatments present an alternative to thermal sterilization with some limitations. Low- (<2 kGy) and medium (3-5 kGy)-dose ionizing irradiations are effective for a log reduction of vegetative cells and spores, respectively; however, very high doses (>10 kGy) are required to inactivate BoNTs. High-pressure processing (HPP), even at 1.5 GPa, does not inactivate the spores and requires heat combination to achieve its goal. Other emerging technologies have also shown some promise against vegetative cells and spores; however, their application to C. botulinum is very limited. Various factors related to bacteria (e.g., vegetative stage, growth conditions, injury status, type of bacteria, etc.) food matrix (e.g., compositions, state, pH, temperature, aw, etc.), and the method (e.g., power, energy, frequency, distance from the source to target, etc.) influence the efficacy of these treatments against C. botulinum. Moreover, the mode of action of different physical technologies is different, which provides an opportunity to combine different physical treatment methods in order to achieve additive and/or synergistic effects. This review is intended to guide the decision-makers, researchers, and educators in using physical treatments to control C. botulinum hazards.

First Expert Elicitation of Knowledge on Possible Drivers of Observed Increasing Human Cases of Tick-Borne Encephalitis in Europe.

Tick-borne encephalitis (TBE) is a viral disease endemic in Eurasia. The virus is mainly transmitted to humans via ticks and occasionally via the consumption of unpasteurized milk products. The European Centre for Disease Prevention and Control reported an increase in TBE incidence over the past years in Europe as well as the emergence of the disease in new areas. To better understand this phenomenon, we investigated the drivers of TBE emergence and increase in incidence in humans through an expert knowledge elicitation. We listed 59 possible drivers grouped in eight domains and elicited forty European experts to: (i) allocate a score per driver, (ii) weight this score within each domain, and (iii) weight the different domains and attribute an uncertainty level per domain. An overall weighted score per driver was calculated, and drivers with comparable scores were grouped into three terminal nodes using a regression tree analysis. The drivers with the highest scores were: (i) changes in human behavior/activities; (ii) changes in eating habits or consumer demand; (iii) changes in the landscape; (iv) influence of humidity on the survival and transmission of the pathogen; (v) difficulty to control reservoir(s) and/or vector(s); (vi) influence of temperature on virus survival and transmission; (vii) number of wildlife compartments/groups acting as reservoirs or amplifying hosts; (viii) increase of autochthonous wild mammals; and (ix) number of tick species vectors and their distribution. Our results support researchers in prioritizing studies targeting the most relevant drivers of emergence and increasing TBE incidence.

Human and animal botulism surveillance in France from 2008 to 2019.

Botulism is a human and animal neurological disease caused by the action of bacterial neurotoxins (botulinum toxins) produced by bacteria from the genus Clostridium. This disease induces flaccid paralysis that can result in respiratory paralysis and heart failure. Due to its serious potential impact on public health, botulism is a closely monitored notifiable disease in France through a case-based passive surveillance system. In humans, this disease is rare, with an average of 10 outbreaks reported each year, mainly due to the consumption of contaminated foods. Type B and to a lesser extend type A are responsible for the majority of cases of foodborne botulism. Each year, an average of 30 outbreaks are recorded on poultry farms, about 20 cases in wild birds and about 10 outbreaks in cattle, involving a large number of animals. Mosaic forms C/D and D/C in birds and cattle, respectively, are the predominant types in animals in France. Types C and D have also been observed to a lesser extent in animals. With the exception of botulinum toxin E, which was exceptionally detected throughout the period in wild birds, the types of botulism found in animal outbreaks are different from those identified in human outbreaks over the last ten years in France and no human botulism outbreaks investigated have been linked to animal botulism. In line with the One Health concept, we present the first integrative approach to the routine surveillance of botulism in humans and animals in France.

Risk of Monkeypox virus (MPXV) transmission through the handling and consumption of food.

Monkeypox (MPX) is a zoonotic infectious disease caused by Monkeypox virus (MPXV), an enveloped DNA virus belonging to the Poxviridae family and the Orthopoxvirus genus. Since early May 2022, a growing number of human cases of Monkeypox have been reported in non-endemic countries, with no history of contact with animals imported from endemic and enzootic areas, or travel to an area where the virus usually circulated before May 2022. This qualitative risk assessment aimed to investigate the probability that MPXV transmission occurs through food during its handling and consumption. The risk assessment used "top-down" (based on epidemiological data) and "bottom-up" (following the agent through the food chain to assess the risk of foodborne transmission to human) approaches, which were combined. The "top-down" approach first concluded that bushmeat was the only food suspected as a source of contamination in recorded cases of MPXV, by contact or ingestion. The "bottom-up" approach then evaluated the chain of events required for a human to become ill after handling or consuming food. This approach involves several conditions: (i) the food must be contaminated with MPXV (naturally, by an infected handler or after contact with a contaminated surface); (ii) the food must contain viable virus when it reaches the handler or consumer; (iii) the person must be exposed to the virus and; (iv) the person must be infected after exposure. Throughout the risk assessment, some data gaps were identified and highlighted. The conclusions of the top-down and bottom-up approaches are consistent and suggest that the risk of transmission of MPXV through food is hypothetical and that such an occurrence was never reported. In case of contamination, cooking (e.g., 12 min at 70°C) could be considered effective in inactivating Poxviridae in foods. Recommendations for risk management are proposed. To our knowledge, this is the first risk assessment performed on foodborne transmission of MPXV.

First Survey about Current Practices of Environmental Monitoring Programs within French Agri-Food Industries.

Food safety is a constant challenge for stakeholders in the food industry. To manage the likelihood of microbiological contamination, food safety management systems must be robust, including food and environmental testing. Environmental monitoring programs (EMP) have emerged this last decade aiming to validate cleaning-sanitation procedures and other environmental pathogen control programs. The need to monitor production environments has become evident because of recent foodborne outbreaks. However, the boundaries of environmental monitoring are not only limited to the management of pathogens but also extend to spoilage and hygiene indicators, microorganisms, allergens, and other hygiene monitoring. Surfaces in production environments can be a source of contamination, either through ineffective cleaning and disinfection procedures or through contamination during production by flows or operators. This study analyses the current practices of 37 French agri-food industries (small, medium, or large), reporting their objectives for EMPs, microbial targets, types, numbers and frequency of sampling, analysis of results, and types of corrective actions.

Clostridium botulinum type C, D, C/D, and D/C: An update.

Clostridium botulinum is the main causative agent of botulism, a neurological disease encountered in humans as well as animals. Nine types of botulinum neurotoxins (BoNTs) have been described so far. Amongst these "toxinotypes," the A, the B and E are the most frequently encountered in humans while the C, D, C/D and D/C are mostly affecting domestic and wild birds as well as cattle. In France for instance, many cases and outbreaks are reported in these animal species every year. However, underestimation is very likely at least for avifauna species where the detection of dead animals can be challenging. Knowledge about BoNTs C, D, C/D, and D/C and the diseases they cause in animals and humans is still scarce and unclear. Specifically, the potential role of animal botulism outbreaks in cattle and poultry as a source of human illness needs to be further assessed. In this narrative review, we present the current knowledge about toxinotypes C, D, C/D, and D/C in cattle and poultry with, amongst various other aspects, their epidemiological cycles. We also discuss the zoonotic potential of these toxinotypes and some possible ways of risk mitigation. An adapted and effective management of botulism outbreaks in livestock also requires a better understanding of these less common and known toxinotypes.

Contribution of Foods and Poor Food-Handling Practices to the Burden of Foodborne Infectious Diseases in France.

The foodborne disease burden (FBDB) related to 26 major biological hazards in France was attributed to foods and poor food-handling practices at the final food preparation step, in order to develop effective intervention strategies, especially food safety campaigns. Campylobacter spp. and non-typhoidal Salmonella accounted for more than 60% of the FBDB. Approximately 30% of the FBDB were attributed to 11 other hazards including bacteria, viruses and parasites. Meats were estimated as the main contributing food category causing (50-69%) (CI90) of the FBDB with (33-44%), (9-21%), (4-20%) (CI90) of the FBDB for poultry, pork and beef, respectively. Dairy products, eggs, raw produce and complex foods caused each approximately (5-20%) (CI90) of the FBDB. When foods are contaminated before the final preparation step, we estimated that inadequate cooking, cross-contamination and inadequate storage contribute for (19-49%), (7-34%) and (9-23%) (CI90) of the FBDB, respectively; (15-33%) (CI90) of the FBDB were attributed to the initial contamination of ready-to-eat foods-without any contribution from final food handlers. The thorough implementation of good hygienic practices (GHPs) at the final food preparation step could potentially reduce the FBDB by (67-85%) (CI90) (mainly with the prevention of cross-contamination and adequate cooking and storage).

Control of Biological Hazards in Insect Processing: Application of HACCP Method for Yellow Mealworm (Tenebrio molitor) Powders.

Entomophagy has been part of human diets for a long time in a significant part of the world, but insects are considered to be a novel food everywhere else. It would appear to be a strategic alternative in the future of human diet to face the challenge of ensuring food security for a growing world population, using more environmentally sustainable production systems than those required for the rearing of other animals. Tenebrio molitor, called yellow mealworm, is one of the most interesting insect species in view of mass rearing, and can be processed into a powder that ensures a long shelf life for its use in many potential products. When considering insects as food or feed, it is necessary to guarantee their safety. Therefore, manufacturers must implement a Hazard Analysis Critical Control plan (HACCP), to limit risks for consumers' health. The aim of this case study was to develop a HACCP plan for Tenebrio molitor larvae powders for food in a risk-based approach to support their implementation in industry. Specific purposes were to identify related significant biological hazards and to assess the efficiency of different manufacturing process steps when used as Critical Control Points. Then, combinations of four different processes with four potential uses of powders by consumers in burger, protein shake, baby porridge, and biscuits were analyzed with regard to their safety.

Critical Orientation in the Jungle of Currently Available Methods and Types of Data for Source Attribution of Foodborne Diseases.

With increased interest in source attribution of foodborne pathogens, there is a need to sort and assess the applicability of currently available methods. Herewith we reviewed the most frequently applied methods for source attribution of foodborne diseases, discussing their main strengths and weaknesses to be considered when choosing the most appropriate methods based on the type, quality, and quantity of data available, the research questions to be addressed, and the (epidemiological and microbiological) characteristics of the pathogens in question. A variety of source attribution approaches have been applied in recent years. These methods can be defined as top-down, bottom-up, or combined. Top-down approaches assign the human cases back to their sources of infection based on epidemiological (e.g., outbreak data analysis, case-control/cohort studies, etc.), microbiological (i.e., microbial subtyping), or combined (e.g., the so-called 'source-assigned case-control study' design) methods. Methods based on microbial subtyping are further differentiable according to the modeling framework adopted as frequency-matching (e.g., the Dutch and Danish models) or population genetics (e.g., Asymmetric Island Models and STRUCTURE) models, relying on the modeling of either phenotyping or genotyping data of pathogen strains from human cases and putative sources. Conversely, bottom-up approaches like comparative exposure assessment start from the level of contamination (prevalence and concentration) of a given pathogen in each source, and then go upwards in the transmission chain incorporating factors related to human exposure to these sources and dose-response relationships. Other approaches are intervention studies, including 'natural experiments,' and expert elicitations. A number of methodological challenges concerning all these approaches are discussed. In absence of an universally agreed upon 'gold' standard, i.e., a single method that satisfies all situations and needs for all pathogens, combining different approaches or applying them in a comparative fashion seems to be a promising way forward.